49. Why is there no picture on my monitor even though the power LED is green?
● Verify the Contrast and Brightness setting of the monitor. First press and hold the 5 (-) button to
increase Contrast and then press and hold the 4 (+) button to increase Brightness. These buttons
are located on the front of your monitor.
● Press both the 5(-) button and the OK button at the same time to switch input A|B.
● Try and repeat step 48 above.
50. Why does the picture disappear after I press the on/off button quickly?
This is a unique Philips feature designed to preserve the life of your monitor. Please allow 5 seconds
between powering off and on your monitor, your picture will then be restored.
To Next Page
Loading...
