3) Press the button. The RESET TO FACTORY SETTINGS window appears.
4) Press the
or button to select YES or NO. NO is the default. YES returns all settings to
their original factory adjustments.
5) Press the button to confirm your selection and return to the MAIN CONTROLS window.
CLOSE MAIN CONTROLS will be highlighted.
Smart
Help
After returning to MAIN CONTROLS . . .
. . . to continue to EXTRA CONTROLS, press the button until EXTRA
CONTROLS is highlighted. Next, start with step 3 under EXTRA CONTROLS.
file:///D|/EDFU/crt_19/edoc/english/OSD/osd_cont.htm (22 of 27)7/19/2004 4:08:26 PM
To Next Page
Loading...
