Philips 10BDL3051T Installation

1.1 Installation of Philips 10BDL3051T:
1.1.1 USB flash drive
1. Download AndroidDS.apk from: http://a.dsig.tv/
2. Copy AndroidDS.apk to the USB-stick.
1.1.2 Screen settings
1. Power On TV
2. Select Language.
3. Select network connection
a. Ethernet
i. Connect the Ethernet cable.
b. Wifi:
i. Select Wifi and press Next
ii. Select SSID
iii. Enter the password
iv. Connect to the network
v. Skip Signage Display settings.
vi. Skip loading configurations from USB or SD.
vii. Select Finish
4. Enter the Configuration Menu. “Stop key, then Volume down key.
Stop and volume keys are located on the back side of the screen.
See figure 1.
Figure 1: Backside of screen
5. Enter pincode. Default pin is: 1234.
6. Select Settings
7. Select Signage Display
8. Select “Change Administrator Password”
9. Enter old pin code. >1234.>
10. Enter new pincode <1111>
11. Exit to Configuration Menu.
12. Connect a USB-stick with the AndroidDS.apk to the screen.
13. Select Apps
14. Select File Manager

Philips 10BDL3051T Specifications

General

Multi-touch	Yes
Aspect ratio	16:10
Response time	30 ms
Display diagonal	10.1 \
Display brightness	300 cd/m²
Display resolution	1280 x 800 pixels
Display technology	LED
Contrast ratio (typical)	800:1
Display number of colors	262144 colors
Display diagonal (metric)	25.6 cm
Number of simultaneous touchpoints	5
Built-in camera	No
Power supply type	DC
Placement supported	Horizontal/Vertical
USB 2.0 ports quantity	1
Mean time between failures (MTBF)	50000 h
Certification	CB, CE, FCC A, UL
Product color	Black
Glass thickness	0.7 mm
Panel mounting interface	75 x 75 mm
Number of OSD languages	18
On Screen Display (OSD) languages	ARA, CHI (SIMPL), CHI (TR), DAN, DEU, DUT, ENG, ESP, FIN, FRE, ITA, JPN, NOR, POL, POR, RUS, SWE, TUR
RMS rated power	4 W
Number of built-in speakers	2
Cables included	DC, HDMI, USB
Sustainability certificates	RoHS
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Power consumption (standby)	0.5 W
Power consumption (typical)	6 W
Compatible memory cards	MicroSD (TransFlash)

Weight and Dimensions

Depth	29 mm
Width	261 mm
Height	167.2 mm
Weight	710 g