MPEG artefact reduction
With MPEG artefact reduction , you can smoothen
the digital transitions in the picture. MPEG artefacts
are mostly visible as small blocks or jagged edges in
images.
To reduce the MPEG artefact . . .
1. Press
and select Setup and press OK.
2. Select TV settings > Picture > MPEG
artefact reduction .
3. Press
(right) and select On or Off.
4. Press
, repeatedly if necessary, to close the
menu.
Digital Crystal Clear
With Digital Crystal Clear, you can fine-tune each
pixel to match the surrounding pixels and produce a
brilliant, high-definition image.
1. Press
and select Setup and press OK.
2. Select TV settings > Picture > Digital Crystal
Clear.
3. Press
(right) and select the settings.
4. Press
, repeatedly if necessary, to close the
menu.
The different settings are . . .
- Advanced sharpness - Enable superior sharpness,
especially on lines and contours in the picture.
- Dynamic contrast - Dynamically enhance the
details in the dark, medium and light areas of the
picture.
- Dynamic backlight - Select a backlight level to
optimise dynamic power consumption and picture
contrast.
- Colour enhancement - Dynamically enhance the
vividness and details of colours.
Advanced picture settings
Gamma
With Gamma, you can adjust the non-linear setting
for picture luminance and contrast.
To adjust the level . . .
1. Press
and select Setup and press OK.
2. Select TV
settings > Picture > Advanced > Gamma.
3. Press
(right) and adjust the value with
(up)
or
(down).
4. Press
, repeatedly if necessary, to close the
menu.
Tint
With Tint, you can change the colour balance.
To select a preset . . .
1. Press
and select Setup and press OK.
2. Select TV
settings > Picture > Advanced > Tint.
3. Press
(right) and
select Normal, Warm or Cool. Select Custom if
you want to set a colour temperature yourself.
4. Press
, repeatedly if necessary, to close the
menu.
Custom tint
With Custom tint, you can set a colour temperature
yourself. To set a Custom tint, first select Custom in
the Tint setting to make the Custom tint menu
available. Custom tint is a setting intended for expert
users.
To set a custom colour temperature . . .
1. Press
and select Setup and press OK.
2. Select TV
settings > Picture > Advanced > Custom tint.
3. Press
(right).
4. Select a setting with the arrow keys. (WP is white
point and BL is black level.)
5. Press OK to confirm a setting. You can also select
one of the presets in this menu.
6. Press
, repeatedly if necessary, to close the
menu.
Video contrast
With Video contrast, you can decrease the range of
the video contrast.
To adjust the level . . .
1. Press
and select Setup and press OK.
2. Select TV settings > Picture > Advanced > Video
contrast.
3. Press
(right) and adjust the value with
(up)
or
(down).
4. Press
, repeatedly if necessary, to close the
menu.
Brightness
With Brightness, you can set the level of brightness
of the picture signal. Brightness is a setting intended
for expert users. We recommend non-expert users to
adjust the brightness with the Backlight
contrast setting.
To adjust the level . . .
1. Press
and select Setup and press OK.
2. Select TV
33
To Next Page
Loading...
