51
Meridian 3
12.4.8 Programing success. There will be the message in the red frame after successful programming.
12.5 Check the FW version after upgrade.
12.5.1 The way to open factory menu.
(1)Connect video source to monitor and AC on.
(2)The way to factory menu: Press “MENU” and “+” keys synchronously (The rightmost and leftmost keys in the
touch keyboard), and DC on. When the screen lights, release the two keys and press “MENU” again to open
factory menu.
“+” key “menu” key DC key
(3)Select “factory” and press menu key to open factory menu as below.
Check this F/W
version.
To Next Page
Loading...
