248C3L LCD 11
Mechanical Instruction
Preparation before disassemble
1.Clean the room for disassemble
2.Identify the area for monitor
3.Check the position that the monitors be placed and the quantity of the monitor ;prepare the area for material flow;
according to the actual condition plan the disassemble layout
4.Prepare the implement, equipments, materials as bellow:
1) Press-fixture
2) working table
3) Screw-driver
4) knife*1
5) glove
6) cleaning cloth
7) ESD protection
item picture Operation Tool Notes
1 Disassemble the base and
hinge
Glove
2 Disassemble the RC
cover from RC
Glove
3 Unlock the hexagonal
screw or HDMI screw and
RC screw
Screw-driver
hexagonal screw
5+
0.6Kg
HDMI screw 4+
0.6Kg
RC screw 3~4Kg
Glove
To Next Page
Loading...
