!
56
Meridian 3
5. Color Temp confirmation
Connect the signal to the monitor, the monitor displays white-picture, use CA-210 to measure the Color Temp of the
screen center and select the OSD to make sure whether the Color Temps accord with the SPEC.
CIE coordinates (x,y)
9300K x = 0.283 ± 0.02; y = 0.297 ± 0.02 PerfecTune II
6500K/sRGB x = 0.313 ± 0.02; y = 0.329 ± 0.02 PerfecTune II
sRGB x = 0.313 ± 0.02; y = 0.329 ± 0.02 PerfecTune II
6. How to enter into the factory mode:
1. Connect the video source and power off the monitor.
2. Press
and buttons at the same time, power on the monitor, and then press the menu again; the
picture will appear on the top left corner.
3. Select the “Factory” and press the “MENU” button to enter the factory mode.
To Next Page
