Philips 32M1N5800A - Page 11

9
Note
• MPRT: To reduce motion blur, LED
backlight will strobe synchronously
with screen refresh, which may
cause noticeable brightness change.
• 75Hz refresh rate or higher is re-
quired for MPRT.
• Adaptive Sync and MPRT cannot be
enabled simultaneously.
• MPRT is to adjust brightness for blur
reduction, so cannot adjust bright-
ness while MPRT is turned on.
• MPRT is gaming-optimized mode.
Turn on MPRT may cause noticeable
screen ickering. It is recommended
to turn o when you are not using
the gaming function.
• This Philips monitor is certied with
NVIDIA® G-Sync®. The technology
is used to match the refresh rate of
the monitor to the graphic cards.
Providing the smoothest gaming ex-
perience by reducing or eliminating
judder, tearing, and stuttering.
Enabling Adaptive-Sync from
the On-Screen Display menu will
automatically activate the appro-
priate technology depending on
the graphics card installed in your
computer:
• If using an NVIDIA GeForce
graphics card, G-Sync compatible
will be enabled.
• Go to www.philips.com/support
to download the latest version of
leaet to get more information on
G-Sync certication.
3
Resolution notication
This monitor is designed for optimal
performance at its native resolution,
3840 x 2160. When the monitor is
powered on at a dierent resolution, an
alert is displayed on screen: Use 3840 x
2160 for best results.
Display of the native resolution alert can
be switched o from Setup in the OSD
(On Screen Display) menu.
4
Physical Function
Tilt
20°
-5°
Swivel
-45°
+45°