Service Modes, Error Codes, and Fault Finding
EN 16 TPM9.2L LA5.
2012-Mar-30
back to
div. table
How to Exit the Factory mode
Use one of the following methods:
• Select EXIT_FACTORY from the menu and press the “OK”
button.
Note: When the TV is switched “off” by a power interrupt, or
normal switch to “stand-by” while in the factory mode, the TV
will show up in “normal operation mode” as soon as the power
is supplied again. The error buffer will not be cleared.
10 CLR_TEMP_G 128 Green colour temperature setting
11 CLR_TEMP_B 128 Red colour temperature setting
12 AUTO_COLOR Press OK PC: any pattern that has black and white, YPbPr: SMPTE bar (colour bar), any timing.
13 ADC_GAIN_R 0 Red ADC gain
14 ADC_GAIN_G 0 Green ADC gain
15 ADC_GAIN_B 0 Blue ADC gain
16 ADC_OFFSET_R 128 Red ADC offset
17 ADC_OFFSET_G 128 Green ADC offset
18 ADC_OFFSET_B 128 Blue ADC offset
19 VIRGIN_MODE Off/On Use this to return the set to virgin mode. Depends whether the set has been used already.
20 E-Fuse On E-fuse mode
21 ORT_MODE Off ORT mode
22 AGEING MODE Off Use this for ageing a new LCD panel
23 RESET_PBS_PWD Press OK Use this to reset the Child Lock
24 VIDEO_PWM_MEDIUM 128
25 VIDEO_PWM_MINIMUM 180
26 VIDEO_PWM_MAXIMUM 0
27 PWM_RATIO_BEST_PICTURE 100
28 PWM_RATIO_STD_TOP 85
29 PWM_RATIO_STD_BOTTOM 75
30 PWM_RATIO_BEST_POWER 68
31 VIDEO_STD_TH_HIGH 99
32 VIDEO_STD_TH_LOW 93
33 YPBPR_PHASE InValid YPbPr Phase setting
34 AUD_LIMITER_MODE 2 Three modes, 0: off, 1: adaptive mode, 2: fixed mode
35 AUD_THRESHOLD_BYTE1 0 Limit threshold
36 AUD_THRESHOLD_BYTE2 0 Limit threshold
37 AUD_THRESHOLD_BYTE3 7 Limit threshold
38 AUD_GAIN_LINEIN 2 Line-in audio gain
39 AUD_GAIN_HDMI 2 HDMI audio gain
40 AUD_GAIN_ATV 2 Analogue TV audio gain
41 AUD_GAIN_DTV 2 Digital TV audio gain
42 AUD_GAIN_USB 2 USB audio gain
43 ESTICKER NVM 1 15 Esticker data
44 ESTICKER NVM 2 0 Esticker data
45 ESTICKER NVM 3 64 Esticker data
46 ESTICKER NVM 4 124 Esticker data
47 ESTICKER NVM 5 91 Esticker data
48 ESTICKER NVM 6 0 Esticker data
49 ESTICKER NVM 7 0 Esticker data
50 ESTICKER NVM 8 0 Esticker data
51 ESTICKER NVM 9 0 Esticker data
52 ESTICKER NVM 10 0 Esticker data
53 ESTICKER NVM 11 16 Esticker data
54 ESTICKER NVM 12 31 Esticker data
55 ESTICKER NVM 13 17 Esticker data
56 ESTICKER NVM 14 7 Esticker data
57 ESTICKER NVM 15 0 Esticker data
58 ESTICKER NVM 16 0 Esticker data
59 ESTICKER NVM 17 0 Esticker data
60 ESTICKER NVM 18 0 Esticker data
61 ESTICKER NVM 19 0 Esticker data
62 ESTICKER NVM 20 0 Esticker data
63 ESTICKER RESET Press OK Reset the E-stickers
64 DIM_LIB_RESET Press OK Reset the Dimming
65 AQ_INDEX 0 1 2 3 Audio Quality index
66 Audio Test Mode Off Used for audio testing during production
67 Audio Channel Type 2.0 Defines the installed speaker system
68 Test Pattern Press OK With the “left” and “right” keys of the remote control various test patterns can be chosen
69 EDID UPDATE Press OK Used to enter a new EDID codes into the NVM
70 TCON_GAMMA_UPDATE Press OK
71 DUMP PQ FROM TV Press OK Saves the picture quality data to a file “pq.bin” to the root of a FAT formatted USB memory stick
72 LOAD PQ to TV Press OK Loads the picture quality data from a file “pq.bin” in to the TV
73 DUMP AQ FROM TV Press OK Saves the audio quality data to a file “AQ.bin” to the root of a FAT formatted USB memory stick
74 LOAD AQ to TV Press OK Loads the audio quality data from a file “AQ.bin” in to the TV
75 EXIT_FACTORY Press OK Exits the Factory mode
Item Item value
Default value
Description32" 37" 42" 47"
To Next Page
Loading...
