4-6 PL15.01-A_DC
3. How to Replace the Front Cabinet
Disassembly Method
CAUTION
#
:
Disassembly MUST be performed in a CR
(Clean Room).
Make sure to perform disassembly operations by
following “2.Disassembly Method”, until Fig. D3
beforehand to remove the CBA units, speakers, etc.
Note: Turning over the unit requires two workers and
a wide flat table.
1. Hold the four corners of the LCD Panel Assembly.
2. With the X-PCB side down, slowly lift and tilt the
unit until it is in a vertical position.
3. From a vertical position, turn the top of the unit
toward the other side.
4. Slowly put the LCD Panel Assembly down.
5. Take off a hooks and remove the Front Cabinet.
To Next Page
Loading...
