8
Use to Select your preferred picture setting, then press OK.
21
Sports
Vivid
Standard
Skip
Please select your preferred picture mode.
9
Use to Select your preferred sound setting, then press OK.
21
Sports
Vivid
Standard
Skip
Please select your preferred sound mode.
10
After Picture and sound setup is completed, A message will appear
if there is the latest software on the network server.
Note(s)
•
If you are not receiving a signal from your Cable service, contact the Cable provider.
•
If you press during autoprogram, this setup of TV channels will be cancelled.
•
The Initial Autoprogram function can be executed for either Antenna or Cable only once. When
you change the connection (Antenna / Cable), select Search for channels again. p. 34
A
After an Initial Setup is completed...
•
If you want to scan the channels Automatically again.
Search for channels p. 34
•
You can add the desired channels not memorized by Autoprogram
through antenna connection.
Weak channel installation p. 34
•
If you want to change to another Language.
Language p. 32
•
If you want to change the country setting.
Country p. 47
•
If you want to change the Location setting.
Location p. 32
•
If you want to change the network setting.
Connect to network p. 37
•
If you want to restore the picture and sound setting.
Picture and sound setup p. 27
17 .English
To Next Page
Loading...
