Philips 40PFL9705H/12 - Main Power Supply; Ambilight Reflector Rim

Mechanical Instructions
EN 23Q551.1E LA 4.
2010-Oct-01
back to
div. table
4.9.3 Main Power Supply
Figure 4-26 Main Power Supply
Refer to Figure 4-19 for details.
1. Unplug all connectors [1].
2. Remove the fixation screws [2].
3. Take the board out.
When defective, replace the whole unit.
4.9.4 Small Signal Board (SSB)
Refer to Figure 4-22
for details.
Figure 4-27 SSB
1. Unplug all connectors [1].
2. Slide the side cover sidewards [2].
3. Remove the fixation screws [3].
4. Remove the bottom cover downwards [4].
4.9.5 AmbiLight reflector rim
Figure 4-28 Rim
Refer to Figure 4-28
for details.
1. Remove the speaker fiaxtion screws and put the speakers
aside, as shown in Figure 4-28
.
2. Release the tape [1].
3. Remove the screws [2] that secure the plastic rim and take
it out.
18754_107_100923.eps
100923
2
2
2
2
2
2
2
2
2
1
18750_111_100415.eps
100415
1
1
1
3
3
4
3
3
3
3
4
2
2
18754_108_100923.eps
100923
1
1
1
2
22
2
2
2