Contrast settings
Contrast modes
With
Contrast modes
, you can set the level at which power
consumption is reduced when dimming the intensity of the
screen. Choose the mode for the best power consumption or
best picture intensity.
To adjust the level . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
Picture
>
Advanced
>
Contrast
>
Contrast modes
.
3 - Press
(right) and select
Best picture
,
Best power
,
Standard
or
Off
.
4 - Press
, repeatedly if necessary, to close the menu.
Dynamic contrast
With
Dynamic contrast
, you can set the level at which the TV
automatically enhances the details in the dark, middle and light
areas of the picture.
To adjust the level . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
Picture
>
Advanced
>
Contrast
>
Dynamic contrast
.
3 - Press
(right) and
select
Maximum
,
Medium
,
Minimum
or
Off
.
4 - Press
, repeatedly if necessary, to close the menu.
Brightness
With
Brightness
, set the level of brightness of the picture. The
Brightness setting is intended for expert users. We recommend
that other users adjust brightness with the
Contrast
setting.
To adjust the level . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
Picture
>
Advanced
>
Contrast
>
Brightness
.
3 - Press
(right) and adjust the value with
(up)
or
(down).
4 - Press
, repeatedly if necessary, to close the menu.
Video contrast
With
Video contrast
, you can decrease the range of the video
contrast. If you are watching 3D pictures, this setting is switched
to
3D video contrast
. Video contrast and 3D video contrast are
settings intended for expert users.
To adjust the level . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
Picture
>
Advanced
>
Contrast
>
Video contrast
.
3 - Press
(right) and adjust the value with
(up) or
(down).
4 - Press
, repeatedly if necessary, to close the menu.
Light sensor
The
Light sensor
adjusts the picture and Ambilight settings
automatically to the lighting conditions of the room. You can
turn Light sensor on or off.
To turn on or off . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
Picture
>
Advanced
>
Contrast
>
Light sensor
.
3 - Press
(right) and select
On
or
Off
.
4 - Press
, repeatedly if necessary, to close the menu.
• Only for TVs with the light sensor function.
Gamma
With
Gamma
, you can set a non-linear setting for picture
luminance and contrast. Gamma is a setting intended for expert
users.
To adjust the level . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
Picture
>
Advanced
>
Contrast
>
Gamma
.
3 - Press
(right) and adjust the value with
(up)
or
(down).
4 - Press
, repeatedly if necessary, to close the menu.
Sharpness settings
Ultra resolution
With
Ultra resolution
, you can turn on a superior sharpness in
line edges and contours.
To turn on or off . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
Picture
>
Advanced
>
Sharpness
>
Ultra resolution
.
3 - Press
(right) and select
On
or
Off
.
4 - Press
, repeatedly if necessary, to close the menu.
Noise reduction
With
Noise reduction
, you can filter out and reduce the level of
image noise.
To adjust the noise reduction . . .
1 - Press
and select
Setup
and press
OK
.
56
To Next Page
Loading...
