Getting to know your display4
English
Control panel (right side view)
No. Name Description
1 Headset socket
This socket is an audio output for connecting an external
headset. The display's speakers will be muted whenever
the headset socket is being used. See "Connecting the
headset audio output" on page 6.
2
CH (Selection)
/button
In the OSD menu, moves the selection highlight up or
down. See "Navigating the OSD menu" on page 9.
3
VOLUME /
button
• Adjusts the volume level of the speakers. See "Adjusting
speaker volume" on page 8.
• In the OSD menu, moves the selection highlight left or
right or changes settings. See "Navigating the OSD menu"
on page 9.
4
MENU button
Displays the OSD menu if not visible, or exits the current
menu if displayed. See "The On-Screen Display (OSD)
menu" on page 8.
5
(Power/
standby) button
Toggles the display between standby mode and on. See
"Power on and standby" on page 8.
4
3
2
5
1
To Next Page
Loading...
