EN 52
Audio and video synchronisation (sync)
If the sound does not match with the video
on screen, you can set a delay on most DVD
Home Theatre Systems to match the sound
and video.
EasyLink
To automatically mute the TV speakers
when content is played from your Home
Theatre System, enable EasyLink. For more
information, see Connect the TV > Use
Philips EasyLink > Configure TV speakers
(Page 61).
Dig. receiver/satellite
First, use two antenna cables to connect the antenna to the receiver and the TV.
Finally, use a SCART cable to connect the receiver to the back of the TV.
To Next Page
Loading...
