6 - To stop configuring this bulb, select OK and
press OK.
7 - In the Configure Ambilight+hue menu, you can
do the same for each bulb.
8 - When all Ambilight+hue bulbs are configured,
select Finish and press OK.
Ambilight+hue is ready for use.
Ambilight+hue Settings
> All Settings > Ambilight > Ambilight +
hue > Switch off
Switch off Ambilight+hue
> All Settings > Ambilight > Ambilight +
hue > Immersion
Press the arrows
(up) or
(down) to adjust
how accurate the Hue bulbs follow the Ambilight.
> All Settings > Ambilight > Ambilight +
hue > Lounge light+hue
If you installed Ambilight+hue, you can let the hue
bulbs follow Lounge light from Ambilight. The Philips
hue lamps will expand the Lounge light effect across
the room.
> All Settings > Ambilight > Ambilight +
hue > View configuration
View current setup of the Ambilight+hue, network,
Bridge and bulbs.
> All Settings > Ambilight > Ambilight +
hue > Reset configuration
Reset current setup of the Ambilight+hue.
52
To Next Page
Loading...
