Need help?Do you have a question about the Philips 46PFL7007T/12 and is the answer not in the manual?
Detailed steps for assembling the TV stand base components.
Connect and secure the main parts of the TV stand assembly.
Insert and attach the stand arm and plate to the base.
Route and manage cables using provided clips for the stand.
Place and secure the television onto the assembled stand.
Steps for preparing the TV for wall mounting, including bracket attachment.
Attach the wall mount bracket securely to the TV.
Instructions for mounting the TV to the wall, including hardware.
Specifications for wall mounting distance and alignment.
Steps for preparing the TV for VESA wall mounting.
Attach the VESA mounting bracket to the TV.
Instructions for installing the VESA mount hardware.
Steps for preparing the TV for wall mounting with specific clearance.
Attach the wall mount bracket securely to the TV.
Instructions for mounting the TV to the wall, including hardware.
Specifications for wall mounting distance and alignment.
Connect devices using HDMI, SCART, and YPbPr interfaces.
Connect antenna or satellite receiver for TV signals.
Connect the TV to a network for internet access.
Connect USB storage, HDD, or other devices.
Connect computers or audio sources via VGA and audio jacks.
Connect and configure antenna or satellite TV.
Connect the power cord and power on the TV for initial setup.
Instructions for charging 3D glasses via USB.
Accessing on-screen help and support resources.
To Next Page
General