4-1 PL12.4_DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
*1: TYPE A
*2: TYPE B
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Step/
Loc.
No.
Part
Fig.
No.
Removal Note
[1]
Stand
Hinge
Assembly
D1 4(S-1) ---
[2]
Stand Base
Assembly
D1 4(S-2) ---
[3]
Rear
Cabinet
D1
17(S-3), 4(S-4),
(S-5), (S-6)
---
[4]
Digital Main
CBA Unit
D2
D5
4(S-7), CN3101
*1
,
CN3013
*1
, CN3701
*1
,
CN3601
*2
, CN3105
*2
,
CN3906
*2
, Wireless
Lan Adaptor
*2
,
CN3801, Jack Holder
---
[5]
Power
Supply
CBA
D2
D5
6(S-8), CN601,
CN1001
---
[6]
AC Inlet
Holder
D3 2(S-9), CL601 ---
[7]
Stand
Bracket
D3 4(S-10), 2(S-11)
[1] Stand Hinge
Assembly
[3] Rear Cabinet
[9] Function CBA
[7] Stand Bracket
[10] Digital PCB
Holder
[13] LCD Module
Assembly
[8] Speaker
[14] Front
Cabinet
[2] Stand Base
Assembly
[11] Power
PCB Holder
[5] Power Supply
CBA
[12] Wall Mount
Bracket Top
[6] AC Inlet
Holder
[4] Digital Main
CBA Unit
[8] Speaker D3
4(S-12),
Speaker Holder
[9]
Function
CBA
D3
D5
2(S-13),
Sensor Holder,
Sensor Plate
---
[10]
Digital PCB
Holder
D4 5(S-14)
[11]
Power PCB
Holder
D4 4(S-15) ---
[12]
Wall Mount
Bracket Top
D4 4(S-16) ---
[13]
LCD
Module
Assembly
D4 --------------- ---
[14]
Front
Cabinet
D4 --------------- ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Fig.
No.
Removal Note