Philips 55PUS8108 User Manual

Although this TV has a very low standby power
consumption, unplug the power cable to save energy if
you do not use the TV for a long period of time.
On or Standby
Before you switch on the TV, make sure you plugged in
the mains power in the POWER connector on the back
of the TV.
Switch On
Press the small joystick key on the bottom of the TV.
Switch to standby
To switch the TV to standby, press  on the remote
control. You can also press the small joystick key on the
bottom of the TV.
In standby mode, the TV is still connected to the mains
power but consumes very little energy.
To switch off the TV completely, disconnect the power
plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet socket
at all times.
11

Philips 55PUS8108 Specifications

General

Screen shape	Flat
Response time	40 ms
Display diagonal	55 \
Display brightness	350 cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	60 Hz
Contrast ratio (typical)	0:0
Display diagonal (metric)	139 cm
Motion interpolation technology	-
Stand weight	250 g
Country of origin	Poland
Hybrid Log-Gamma (HLG)	No
Annual energy consumption	72 kWh
Dimensions (with stand) (WxHxD)	1231.2 x 779.6 x 257.6 mm
Dimensions (W x D x H) with stand	1231.2 x 257.6 x 779.6 mm
Tuner type	Analog & digital
Analog signal format system	NTSC, PAL
Digital signal format system	DVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2, DVB-T2 HD
Music apps	YouTube Music
Video apps	All 4, Amazon Prime Video, BBC iPlayer, ITV Hub, My5, Netflix, YouTube
Operating system installed	tvOS
Sound modes	AI Sound, Dialog, Dolby Audio
Audio system	Philips Integrated Speakers
Audio decoders	Dolby Atmos
RMS rated power	20 W
Number of speakers	2
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Bluetooth version	5.0
Stand type	Legs stand
Product color	Black
Panel mounting interface	200 x 300 mm
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10), High Dynamic Range 10+ (HDR10 Plus), Hybrid Log-Gamma (HLG)
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	0
AC input voltage	220-240 V
AC input frequency	50/60 Hz
Energy efficiency scale	A to G
Power consumption (standby)	0.3 W
Power consumption (typical)	72 W
Processor	Pixel Precise Ultra HD
Cables included	AC
Remote control type	IR
Package depth	160 mm
Package width	1360 mm
Package height	840 mm
Package volume	182784 cm³
Package weight	17500 g
Export Control Classification Number (ECCN)	8528724000

Weight and Dimensions

Stand width	728.8 mm
Depth (with stand)	257.6 mm
Width (with stand)	1231.2 mm
Height (with stand)	70 mm
Weight (with stand)	14850 g
Depth (without stand)	81.6 mm
Height (without stand)	721.6 mm
Weight (without stand)	14600 g