Region and Language Settings
Language
(Home) > Settings > Region and
language > Language
Change the language of the TV menu and messages
(Home) > Settings > Region and
language > Language > Menu language
Set audio preference language
(Home) > Settings > Region and
language > Language > Primary audio, Secondary
audio
Digital TV channels can broadcast audio with several
spoken languages for a programme. You can set a
preferred primary and secondary audio language. If
audio in one of these languages is available, the TV will
switch to this audio.
Set subtitle preference language
(Home) > Settings > Region and
language > Language > Primary subtitle, Secondary
subtitle
Digital channels can offer several subtitle languages for a
programme. You can set a preferred primary and
secondary subtitle language. If subtitles in one of these
languages are available, the TV will show the subtitles
you selected.
Set teletext preference language
(Home) > Settings > Region and
language > Language > Primary text, Secondary text
Some digital TV broadcasters have several Text
languages available.
Clock
(Home) > Settings > Region and language > Clock
Correct clock automatically
(Home) > Settings > Region and
language > Clock > Auto clock mode
• The standard setting for the TV clock is Automatic. The
time information comes from the broadcasted UTC -
Coordinated Universal Time information.
• If the clock is not correct, you can set the TV clock
to Country dependent.
• When select Country dependent, you can set the time
for Automatic, Standard time, or Daylight saving time.
Correct clock manually
(Home) > Settings > Region and
language > Clock > Auto clock mode > Manual
(Home) > Settings > Region and
language > Clock > Date, Time
Go to previous menu, and select Date and Time to adjust
the value.
Note:
• If none of the automatic settings display the time
correctly, you can set the time manually.
• The Auto clock mode setting will be back to Automatic
after the TV power is turned off and on again.
Set time zone or set a time offset for your region
(Home) > Settings > Region and
language > Clock > Time zone
Select one of the time zones.
Set the TV to switch to Standby automatically after a
preset time
(Home) > Settings > Region and
language > Clock > Sleep timer.
Set the TV to switch to Standby automatically after a
preset time. With the slider bar you can set the time to
up to 180 minutes in increments of 5 minutes. If set to 0
minutes, the sleep timer is switched off. You can always
switch off your TV earlier or reset the time during the
countdown.
40
To Next Page
Loading...
Need help?
General
Weight and Dimensions
