Philips 6000 Series - 2.4 MultiClient Integrated KVM

18
English
•
Denitions of button functions
Buttons (main unit) Operation Function
Start button
Short press once Start/pause cleaning
Start button
Press and hold for 3 s Startup/shutdown
Recharging button
Short press Enable recharging
Recharging button
Press and hold for 3 s
Child lock
Long press it to disenable child lock
Start button
+
Recharging button
Press and hold the two buttons at the
same time for 3 s
Press and hold the two buttons at the
same time for 15 s
Network pairing mode
Restore factory settings
Function description
•
Suction power gear setting (only supporting operations in the App)
Users may set the working suction power gears of the robot in the App. The gear settings are as follows:
 Quiet gear
 Standard gear
 Medium gear
 Powerful gear
•
Mopping power gear setting (only supporting operations in the App)
By default, the robot starts mopping with a low-gear water level. Users may set the water level in the App.
•
Automatic mop washing
Every time before mopping, the robot will wash the mop rst. By default, the robot will automatically
return to the docking station to wash the mop after each cleaning of 10 m² area. After nishing the
mopping task, the robot will automatically return to the docking station to wash and air-dry the mop, and
recharge.
Note: Do not open the water tank cover during mop washing, otherwise the service of the robot may be
aected.
•
Mop air-drying
Upon completion of the cleaning task, the robot will return to the docking station to clean and air-dry
the mop, which will last for 8 h. The eect of air-drying is subject to the humidity and temperature of the
home environment.