Picture Format
If the picture is not filling the whole screen, if black
bars are showing on the top or bottom or at both
sides, you can adjust the picture to fill the screen
completely.
To select one of the basic settings to fill the screen…
1 - While watching a TV channel, press //
Home > Settings > Picture > Picture Format.
2 - Select a format from the list and press OK.
3 - Press BACK, repeatedly if necessary, to close
the menu.
The following format can be available according the
picture on screen . . .
• Wide screen
• Fill screen
• Fit to Screen
• Unscaled
Sound
Sound Style
Select a style
Press // Home > Settings >
Sound > Sound style.
For easy sound adjustment, you can select a preset
setting with sound style.
• Personal - Your personal choices made in
Personalise picture and sound
• Original - Most neutral sound setting
• Movie - Ideal for watching movies
• Music - Ideal for listening to music
• Game - Ideal for gaming
• News - Ideal for speech
Sound Management
Select a device.
Press // Home > Settings >
Sound > Sound Management.
Configure the audio output devices.
• TV Speakers - Set the TV to play the sound on TV or
on the connected audio system.
• Headphone/Bathroom speakers - On/Off.
• Headphone/Bathroom Spk Fixed Vol - When
enabled, the volume level of
the Headphone/Bathroom speaker will be fixed to
the Switch on Settings.
• Headphone Detection - On/Off.
TV placement
Press // Home > Settings > Sound > TV
Placement.
Select On a TV stand or On the wall to have best
sound reproduction according to the setting.
Eco Settings
Sleep Timer
Press // Home > Settings > Eco Settings >
Sleep Timer.
Set the TV to switch to standby automatically after a
preset time.To disable this feature, please set time to
zero.
Press the arrows (up) or (down) to adjust the
value. The value 0 (Off) deactivates the automatic
switch off.
Select Switch off timer, the TV switches off
automatically to save energy.
* TV switches off if receiving a TV signal but you don't
press a key on the remote control during a 4 hour
period.
* TV switches off if not receivING a TV signal nor a
remote control command for 10 minutes.
* If you use the TV as a monitor or use a digital
receiver to watch TV (a Set-Top Box - STB) and you
do not use the remote control of the TV, you should
deactivate this automatic switch off, to set the value
to 0.
Screen Off
Press // Home > Settings > Eco Settings >
Screen Off.
If you only listen to music on TV, you can switch off
the TV screen.
Only the TV screen will switch off. To switch the
screen back on, press any key on the remote control.
Region, and Language
languages
Press // Home > Settings > Region, and
Language > Languages.
Set the region or language settings.
• Android system / Menu Language - Change the
language for menus and messages.
• Primary Audio - Set your highest preference for
25
To Next Page
Loading...
