How do I test my hearing and set up my hearing
profile?
Start the hearing test
from (Home) > Settings > Sound > Personalised
sound > Configure. Create your own hearing profile
with a short hearing test.
Before the test, you need to switch your current audio
out to TV speakers as the setup affects TV speakers only.
The hearing test works best when carried out in silence,
make sure your environment is quiet when testing.
Select Start and enter a profile name to start the test.
During the test:
• You will hear an increasing beep sound.
• Press OK button when you hear the beep sound.
• Then, you will hear a decreasing beep sound.
• Press OK button when you don't hear the beep sound.
• The test will repeat 5 times for different tones.
Once the test is completed, your hearing test results will
be presented and then select Save and exit to store the
profile. You can apply current profile or create other
profiles by maximum 3 profiles. You can also Rename
profile or Remove profile when needed.
EasyLink 2.0
Control the sound settings of the HDMI sound system
via EasyLink 2.0
(Home) > Settings > Sound > EasyLink 2.0.
You can adjust the individual sound settings of the HDMI
sound system via Frequent settings or Settings > Sound
> EasyLink 2.0. This is only applicable with EasyLink 2.0
compliant HDMI sound system. To switch on the control,
make sure the EasyLink 2.0 sound control menu item is
set to On under General settings > EasyLink > EasyLink
2.0 sound control.
Select sound style
(Home) > Settings > Sound > EasyLink 2.0 > Sound
style.
Switch between the preset sound styles. There are ideal
styles for watching movies, listening to music, or other
sound contents.
• Movie - Ideal sound style for watching movie.
• Music - Optimised for listening to music.
• Voice - Enhanced the dialog in the vocals.
• Stadium - Gives a feel of a large open-air stadium.
• Custom - Personalised sound mode. The setting is only
available when connected device is compatible with TV
for the feature.
Adjust bass level
(Home) > Settings > Sound > EasyLink 2.0 > Bass.
Press the Arrow / navigation keys to adjust the level of
bass.
Adjust treble level
(Home) > Settings > Sound > EasyLink 2.0 > Treble.
Press the Arrow / navigation keys to adjust the level of
treble.
Custom Equaliser
(Home) > Settings > Sound > EasyLink 2.0 > Custom
Equaliser.
Adjustable frequency bands when the Sound style is set
to Custom. Press the Arrow / navigation keys to
adjust the level of AI Equaliser. The setting is only
available when connected device is compatible with TV
for the feature.
Surround Sound
(Home) > Settings > Sound > EasyLink 2.0 > Surround
Sound.
Select a surround effect from the preset types.
• Upmix - Upmix to take full advantage of all speakers.
• Standard - Speakers output follow the original
channels.
• Surround AI - Optimum surround effect using AI
analysis.
DRC
(Home) > Settings > Sound > EasyLink 2.0 > DRC.
Select the preferred Dynamic Range Control (DRC).
• Auto - Dynamic range is automatically adjusted.
• On - Optimize the dynamic range.
• Off - Turn off dynamic range adjustment.
Height speakers
(Home) > Settings > Sound > EasyLink 2.0 > Height
speakers.
Select the preferred height speakers movement. The
setting is only available when connected device is
compatible with TV for the feature.
• Auto - Dynamic movement follow contents.
• On - Always elevated.
• Off - Flat position.
33
To Next Page
Loading...
