EasyManua.ls Logo

Philips 660 - Charging and Direct Use; Charging the Philishave; Shaving Directly from Mains

Philips 660
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
For the best results stretch the skin to bring the hairs into
an upright position.
Then move the shaving unit against the direction of the
growth of the hairs.
The trimmer has been especially designed for grooming
sideburns, moustache and beard.
The trimmer is not required for long hairs in the neck area;
these hairs can easily be shaved off with the shaving unit.
Charging (voltages in the range 100-240 Volt AC)
It is advisable to charge the shaver at temperatures
between 5 °C and 35° C (41 °F and 95 °F). This
guarantees maximum life from the rechargeable battery.
Keep the cassette open if you charge the appliance in it.
- Slide the on/off switch (C) downwards.
- Insert the small plug firmly into the connector (E) up to the
indication mark.
- Then connect to the wall socket. The green pilot light (B)
will come on.
A full charge requires approx. 1 hour.
Regular cleaning of the shaver means that less battery
energy is consumed, so that more shaving time becomes
available.
The shaver will not be damaged by leaving it connected to
the mains supply after it is fully charged.
However, it is not advisable to charge the shaver
permanently as this would shorten the life of the
rechargeable battery.
Shaving directly from the mains
- Slide the on/off switch (C) downwards.
- Connect the appliance to a wall socket.
- Then switch the appliance on.
6

Related product manuals