set the advance settings.
• Downmix mode
• DTS DRC
• Sonic emotion
• DBX
• Dolby audio processing
• DTS Virtual:X
• DTS-StudioSound 2
Reset to default
Reset the current sound settings to default.
11.4
Power Settings
MENU > TV options > Power.
Set Sleep timer
Power > Sleep timer.
TV switches to standby mode automatically after a
preset time.
Set screen off to save energy consumption
Power > Picture off.
Select Picture off, the TV screen is switched off, to
switch the TV screen back on, press any key on the
remote control.
Set TV switch off timer
Power > Switch off timer.
Select Switch off timer, the TV switches off
automatically at a preset time to save energy.
No signal auto power off
Power > No signal auto power off.
Press Navigation keys up or down to set the
value. Select Off to deactivates the automatic switch
off.
* TV switches off if receiving a TV signal but you don't
press a key on the remote control during a 4 hour
period.
* TV switches off if not receiving a TV signal nor a
remote control command for 10 minutes.
* If you use the TV as a monitor or use a digital
receiver to watch TV (a Set-Top Box - STB) and you
do not use the remote control of the TV, you should
deactivate this automatic switch off, to set the value
to Off.
11.5
Advanced Options
Audio Soundtracks
MENU > TV options > Advanced Options >
Sountracks.
Set the audio sountracks based on the channel audio.
This is for DTV only.
HBBTV Settings
MENU > TV options > Advanced
Options > HBBTV settings.
Switch on HbbTV
HBBTV settings > On.
Set the HbbTV History Tracking
HBBTV settings > Do Not Track.
Set the options according to your preference.
Set the HbbTV Cookies
HBBTV settings > Cookie Settings.
Set the options according to your preference.
Set other options
HBBTV settings > Persistent Storage, Block Tracking
Sites, or Device ID.
Select one of the options and switch it to on or off.
Reset HbbTV Device ID
HBBTV settings > Reset Device ID.
You can reset your TV unique device identifier. A new
identifier will be created. This will replace your Device
ID with a new identifier.
OAD
MENU > TV options > Advanced Options > OAD.
Set the Over-the-air software update auto download
to on or off.
32
To Next Page
Loading...
