8. Sources
8.1. Switch to a device
From the list of Sources, you can switch to any of the
connected devices. You can switch to a tuner to watch
display or open the content of a connected USB storage
device. You can switch to your connected devices to
watch their program, a digital receiver or a Blu-ray Disc
player.
To switch to a connected device:
1 - Press SOURCES to open the Sources menu.
2 - Select one of the item in the source list and press OK.
The display will show the program or content of the
device.
* Note: HDMI device listed in Source list as Unregistered
cannot be controlled with the display's remote control as
communication protocol is limited.
20
To Next Page
Loading...
