
Do you have a question about the Philips 920 and is the answer not in the manual?
| Precision mode | Yes |
|---|---|
| Wet and dry use | Yes |
| Cordless use | Yes |
| Travel lock | Yes |
| Contour Following | Yes |
| Charging Time | 1 hour |
| Battery Type | Li-ion |
| Cleaning | Yes |
| Quick charge | Yes |
| Cleaning system | Yes |
Key safety instructions regarding water exposure and heat sources.
Instructions on using the slider switch with a locking knob to prevent accidental activation.
Charge for at least 8 hours before first use or after long periods of inactivity.
Charge between 5-35°C, keep lid open to prevent overheating.
Insert the plug fully home, noting the indication mark. Supports 100-240V mains.
Monitor charging progress via flashing blocks indicating battery level.
Energy meter blocks show remaining charge, visible for approx. 8 seconds.
Energy meter blocks disappear successively as charge depletes.
Last block turns red with a sound signal, indicating recharge is needed.
Instructions for a quick charge when batteries are completely empty.
Instructions for shaving directly from the mains supply using the cord.
Instructions for turning the shaver on.
Customize comfort control for skin sensitivity, starting with position 1.
Move unit quickly, against hair growth, stretch skin. Shave dry skin for best results.
Push slide upwards to engage, downwards to disengage. Clean after use.
Designed for grooming sideburns, moustache, and beard.
Apply two drops of light machine oil to trimmer teeth every six months.
Use the short bristled brush to clean the shaving head slots.
Press retaining button (1) and lift shaving unit (2).
Use the long bristled brush to remove hairs from the chamber and unit.
Release retaining plate, remove one head (guard/cutter) at a time.
Do not mix cutters and guards; they are matched for optimal performance.
Brush the cutter in the direction of the arrow using the short bristled brush.
Lubricate with light machine oil or Philishave cleaner/lubricant for dry skin.
Use only Philishave replacement heads type HP 1915 R for worn or damaged heads.
Connects shaver to car battery via lighter socket for charging.
Protects shaver and allows compact storage of shaver and cord.
Provides space-saving storage for the shaver.
Disconnect power, run until empty, remove batteries using screwdriver, dispose properly.
NiMH batteries can be identified by the NIMH print.











