Philips AC4025/10 - Page 14

14
EN
6 Place the new activated carbon lter in
the purier.
4
1
2
7 To reattach the front panel, insert the
bottom hooks into the bottom of the
purier rst (1). Then, push the panel
against the body of the purier(2).
2
1
8 Reset the activated carbon lter and the
HEPA lter lifetime (see ‘Reset the lter
lifetime counter).
3 Remove the lters using the tag on the
lter. Take the lters by both sides and
gently deposit them into the household
trash bin.
Note
•
Do not touch the pleated lter surface, or smell the
lter as it has collected pollutants from the air.
• Wash your hands after disposing of the used lters.
4 Remove all packaging material from the
new lters.
5 Place the new HEPA lter in the purier
rst.
1
2