Philips AJ2000 Quick Start Guide

STANDBY
This product has been manufactured by, and is sold
under the responsibility of Gibson Innovations Ltd.,
and Gibson Innovations Ltd. is the warrantor in
relation to this product.
Philips and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used
under license.
AJ2000_05_QSG_V4.0
Quick Start Guide
www.philips.com/support
Always there to help you
Register your product and get support at
Question?
Contact
Philips
CR2032
CR2032
STANDBY
AJ2000
Always there to help you
Register your product and get support at
www.philips.com/support
(STANDBY)
Question?
Contact
Philips
Note:
• Make sure that you have set the clock correctly.
• You can select buzzer or your last listened FM station as alarm source. The alarm
volume is not adjustable, but will go up gradually to gently wake you up.
Press
or repeatedly to activate or
deactivate the alarm timer.
When the alarm goes off, press SNOOZE.
» The alarm snoozes and repeats ringing nine minutes
later.
To replace the battery:
1 Push the clip to the left and pull out the battery
tray.
2 Insert 1 x CR2032 battery as illustrated.
For rst-time use, remove the protective tab to
activate the battery.
Note:
• You can only use AC power as power supply.
The battery can only back up clock and alarm
settings.
Quick start guide
AJ2000_05_QSG_V4.0.indd 1 2017/5/25 10:24:41

Philips AJ2000 Specifications

General

Radio type	Clock
Tuner type	Digital
Auto digital tuning	Yes
Supported radio bands	FM
Display type	LED
MP3 playback	No
Product color	Mirror, White
Country of origin	China
Number of alarm times	2
Input voltage	100-240 V
Frequency range	87.5 - 108 MHz
Apple docking compatibility	Not supported
Power source	AC
AC input frequency	50 - 60 Hz
Number of built-in speakers	1
Package type	Box
Package depth	95 mm
Package width	233 mm
Package height	96 mm
Package weight	382 g
RMS rated power	- W
Harmonized System (HS) code	85271900

Weight and Dimensions

Depth	81 mm
Width	185 mm
Height	85.2 mm