Philips AJ3200 - Page 2

Charge your mobile devices
1 Connect the clock radio with your mobile device.
• For Android-powered mobile device with a micro USB socket: use the supplied cable to connect the product with the mobile device;
• For Apple device with a lightning or 30-pin connector: use the charging cable of the Apple device (not supplied) to connect the product with the mobile device.
2 Connect the clock radio to AC power.
» The mobile device begins to charge.
Specications
Amplier
Total Output Power 500 mW
Tuner (FM)
Tuning Range 87.5-108 MHz
Tuning Grid 50 KHz
Sensitivity
- Mono, 26 dB S/N Ratio <22 dBf
Total Har monic Distortion <3%
Signal to Noise Ratio >50 dBA
General information
AC Power (power adapter) Brand name: Philips;
Model: S012B0551500B;
Input: 100-240V~ 50/60Hz max. 400mA
Output: 5.5 V
150 0m A
USB Charging Voltage DC 5 V
USB Charging Current ≤ 1000 mA
Operation Power Consumption 9 W
Standby Power Consumption <1 W
Dimensions:
- Main Unit (W x H x D) 112 x 101 x 125 mm
Weight:
- Main Unit 0.4 kg
Press SLEEP repeatedly to select a period (in minutes). After the set per iod, the
product switches to standby mode automatically.
• To deactivate the sleep timer, press SLEEP repeatedly until [OFF] is displayed.
When the alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing nine minutes
later.
Press AL1 or AL2 repeatedly to select an alarm source
(FM radio or buzzer) or deactivate the alarm timer.
Note:
• You can only set the alarm in standby mode.
• Make sure that you have set the clock correctly.
AJ3200_05_QSG_V5.0.indd 2 6/6/2017 4:22:52 PM