Philips Allegiant LTC 8800 Series - KEYBOARD USER FUNCTIONS; User Function Descriptions and Access Levels

58
KEYBOARD USER FUNCTIONS
General
User functions are keyboard operations which are
used infrequently and do not demand their own keys.
The various functions are listed in the table below.
Note that certain functions are restricted to certain
user priority levels. Information on user priority levels
can be found in the section on User Information. To
execute these user functions, select the desired
function, then follow the steps below. Each function
is described in its own section with additional
instructions.
1. Press USER and verify the indicator lights above
the key.
2. Key in the desired user function number using
the numeric keypad.
3. Press ENTER. Note that the keyboard camera
display will show a "F" followed by the function
number selected.
4. Follow the directions for the specific user
function as described in its own section.
5. Press USER to exit back to normal mode.
EXAMPLE: USER 1 ENTER
The above example will access user function #1
as described in the section below.
Joystick Joystick Access Level
Fn# Up/Down Left/Right Function Description 1 2-7 8
1 n/a n/a Local keyboard test Y Y Y
2 n/a n/a Show keyboard port number Y Y Y
3 n/a n/a Select keyboard beeper on/off Y Y Y
4 Up/down Left/right Adjust position of monitor display Y Y N
5 Brightness Msg vs. Stat Monitor display brightness / status selection Y Y N
6 Time/date On/Off Overlay On/Off Select monitor display option Y Y N
7 Set Select Set time Y Y N
8 Set Select Set date Y Y N
9 Set Select Set Camera ID Y N N
10 n/a n/a Change user password Y Y Y
11 Select n/a Select Time/date format Y N N
12 n/a n/a Default all monitor overlays Y N N
13 Select n/a Print configuration tables to system printer Y N N
14 n/a n/a Reserved -- -- --
15 n/a n/a Reset system (password required) Y N N
16 Select Enable/Disable Time Event Enable/Disable Y N N
17 Set Select Set Monitor ID Y N N
18 Select n/a Print Sequence Y N N
19 Select n/a Select alarm response (password req'd) Y N N
20 Select n/a Select printer verbosity Y N N
21 Select n/a Designate alarm monitor type (password) Y N N
22 Select n/a Select control code format (fixed/variable) Y N N
23 n/a n/a Display CPU software version number Y Y Y
24 Up/down Left/right Set positions on all monitor displays Y Y N
25 Brightness Msg vs. Stat Set brightness on all monitor displays Y Y N
26 Time/date Overlay Set display options on all monitors Y Y N
27 Keyboard Log-in Select Select Keyboard Log-in mode Y N N
28 Console Log-in Select Select Console Log-in mode Y N N
29 Default Parameters Select Default RS-232 Parameters Y N N
30 Console Parameters Select Set Console RS-232 Parameters Y N N
31 Printer Parameters Select Set Printer RS-232 Parameters Y N N
32 Alarm Parameters Select Set Alarm RS-232 Parameters Y N N
33 n/a n/a Display User Number and Priority Y Y Y