EasyManua.ls Logo

Philips AquaTrio Cordless 7000 Series - Charging; Charging the Appliance

Philips AquaTrio Cordless 7000 Series
169 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
English
Charging
The appliance is equipped with a 25 V Li-Ion battery. Charging takes 4 hours.
1 To charge the appliance, open the sealing cap on the back of the appliance.
2 Insert the power plug into the socket on the back of the appliance. Then
insert the adapter into the wall socket.
3 A value between 0% and 90% flashes on the screen to indicate that the
appliance is charging.
4 When the appliance is fully charged, the value 100% lights up on the screen.
After a few minutes, the display will switch off.
5 Remove the power plug from the socket on the back of the appliance.
6 Close the sealing cap.
Warning: Store and charge the appliance at a temperature
above 5°C and below 35°C.

Table of Contents

Other manuals for Philips AquaTrio Cordless 7000 Series

Related product manuals