Need help?Do you have a question about the Philips AS 655 and is the answer not in the manual?
General| Brand | Philips |
|---|---|
| Model | AS 655 |
| Category | Stereo System |
| Language | English |
Details on connecting the mains plug, including wire colours and terminal identification.
Setting the voltage selector to the local mains voltage if available.
Connecting a record player not connected to the mains.
Connecting loudspeakers, including wire marking and terminal use.
Connecting the system to the mains, checking local voltage.
Connecting external devices like record players or TV.
Connecting an FM aerial for optimal reception.
Overview of buttons and displays on the front panel of the unit.
Details on record player operation and components.
Explanation of buttons and usage of the remote control.
Instructions on selecting signal sources and operating the remote.
Steps for powering the amplifier unit on and off.
How the unit automatically selects the sound source.
Using the standby function via the remote or unit.
Adjusting the tuning frequency step for AM bands.
Procedure to remove the LW waveband from tuning options.
How to tune to desired radio stations using various methods.
Selecting and listening to pre-programmed radio stations.
Manually storing radio stations into memory presets.
Automatically finding and storing radio stations.
Instructions for placing records and playing them.
Procedure for loading up to five CDs into the changer tray.
Starting, pausing, and stopping CD playback.
Choosing a particular CD from the loaded selection.
Choosing a specific track on a CD for playback.
Fast searching through a CD track.
Playing the beginning of each track for preview.
Playing tracks from CDs in a random order.
Selecting a different track while playback is active.
Selecting the next track during random playback.
Setting the unit to continuously repeat a selected CD.
Setting the unit to continuously repeat all loaded CDs.
Creating a custom playback sequence of tracks.
Reviewing the sequence of programmed tracks.
Deleting all programmed tracks from the memory.
Removing a specific track from a programmed sequence.
Switching to other sources while a CD is playing.
Explanation of symbols and messages shown on the CD display.
Instructions for recording from various sources onto cassette tape.
Playing cassettes in either deck 1 or deck 2.
Enabling continuous playback between both cassette decks.
Copying cassettes from deck 2 to deck 1 at high speed.
Using buttons for fast forward and rewind of cassette tapes.
How the unit turns off automatically after operations.
Notes on leader tape, recording protection, and storage.
Guidelines for cleaning and handling CDs.
Cleaning the CD player and avoiding environmental hazards.
Cleaning heads, capstan, and pressure roller for quality.
Stylus unit replacement and dust cover adjustment.
Common problems like no power or bad sound and their solutions.
Resolving issues like hum, noise, or reception problems.
Fixing 'no DISC' or 'Err' indications and playback errors.
Addressing no sound, bad sound, or recording interruptions.
Solutions for no sound, bad sound, or skipping.
Resolving issues with remote operation or error indications.
Safety advice regarding repairs and warranty.
Details of warranty benefits and coverage in Australia.
Conditions for claiming warranty service in Australia.
Details of warranty benefits and coverage in New Zealand.
Conditions for claiming warranty service in New Zealand.
To Next Page
