ENGLISH
C 2 Press the Shaver Head Release Button to
open the Shaver Head Assembly.
C 3 Pull the shaving unit off the shaver.
C 4 Turn the lock counterclockwise to unlock
(A) and remove the retaining frame (B).
C 5 Remove and clean one set of cutters and
combs at a time.
C 6 Separate the cutter from the comb and
clean it with the short bristled side of the
brush supplied.
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
21
A
B
To Next Page
Loading...
