- English 25 -
HOW TO USE / CONNECTING THE UNITS
between the various user
modes on the parent
and ECO?
monitor�
that the parent unit is still on and connected to the baby unit� All normal
and sensitivity buttons�
is no sound detected for 20 seconds (or not enough sound above the
sensitivity setting)� Both display and sound will be activated immediately
when your baby cries and the sensitivity threshold is passed� When the
lullaby menu is accessible�
when no sound is detected for 20 seconds� Eco Mode reduces power
consumption during quiet times while keeping you connected to your
baby� In ECO mode the ECO LED light is green and the device will operate
2 seconds ping mechanism to check the connection with the baby unit
instead of a continuous radio frequency connection� Therefore the Baby
Unit will also consume less energy in ECO mode�
How can I reset the
parent unit?
You can reset the parent unit by simultaneously press the "power on/
user information stored in the memory of the parent unit such as user
vibration settings will not be lost�
To Next Page
Loading...
