Philips AVENT SCF883/03 - Steaming Process; Stopping Steaming and Cooling; Blending After Steaming; Blending Safety Precautions

- 16 -
13 Turn the control knob back to the o position (OFF)� Wait 2 minutes, or until
there is no more steam coming from the top of the appliance before removing
the jar�
Caution
• If you intend to start another steaming cycle, let the appliance cool down for
10minutes, and empty any remaining water out of the water tank before you rell
and start a new steaming cycle.
14 To blend the steamed ingredients, refer to chapter “Blending after steaming”.
15 There may still be some water remaining in the water tank after a steaming cycle�
This is normal� Wait until the appliance cools down to room temperature, then
empty the water tank of all residual water� To empty or clean the water tank,
refer to the chapter “Cleaning and descaling”.
Blending after steaming
Caution
• The jar and the lid will become hot after the steaming cycle. Only hold the jar by the
specially designed heat-resistant handle.
• Always make sure that the lid of the jar is correctly closed and locked in place while the
appliance is in use.
• Always make sure that the jar lid has cooled down after steaming before you open
it to add more ingredients (do not ll the jar past the top edge of the plastic part of
blade unit), or to remove the remaining water from the jar.
• If you have added additional liquids, never put the jar in the steam position, as the
liquid will go through the sieve.