Philips AVENT SCF883/03 - Reheating Function; Reheating Process Execution

- 23 -
7 Align the connector on the jar lid to the locking area on the water tank, and
then place the jar on the main unit with the jar lid on the bottom� Press the jar
downwards to lock it rmly on the main unit, and make sure the handle is on the
right-hand side�
Note
• Make sure the water tank lid is correctly locked in place before placing the jar on the
main unit.
8 If the control knob is not in the o position (OFF), turn it to the o position rst.
9 Plug in the appliance�
10 Turn the control knob to select the reheat time that matches with the storage pot
placed in the jar�
» Choose 15minutes ( ).
» The steaming light will turn white to indicate that the appliance is reheating.
11 When the reheating cycle is nished, the appliance will beep and the steaming
light will turn o.
12 Turn the control knob back to the o position (OFF)� Wait 2 minutes, or until
there is no more steam coming from the top of the appliance before removing
the jar�