EasyManua.ls Logo

Philips AVENT SCF883/03 - Reheating Function; Completing Reheating Operations; Defrosting Function; Defrosting Preparation Steps

Philips AVENT SCF883/03
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 24 -
13 Open the jar lid, and use the hook on the spatula to take the storage pot out �
14 There may still be some water remaining in the water tank after a reheating cycle�
This is normal� Wait until the appliance cools down to room temperature, then
empty the water tank of all residual water� To empty or clean the water tank,
refer to the chapter “Cleaning and descaling”.
Defrosting
If you have used the special storage pots to freeze blended food, you can use the
appliance to gently defrost the frozen food.
Note
Always put previously blended food in the storage pot to defrost.
Make sure that the sealing ring is assembled around the jar lid before defrosting, and
that the at side of the sealing ring is facing out.
1 Fill the water tank with water up to the MAX water level marking indicated on
the side of the water tank or the MAX water level indication in the water tank�
2 Follow steps 2 to 8 in the chapter “Reheating”.
3 Turn the control knob and select 30 minutes
» The steaming light will turn white to indicate that the appliance is defrosting.
4 When the defrosting cycle is nished, the appliance will beep and the steaming
light will turn o.

Related product manuals