Philips BFL2114/27 Series - Premises Geonames ID; Device Name; Installer Identification

- 39 -
6.4.8 HotSpot Default Frequency
o Navigate to the [HotSpot Default
Frequency] menu
o You will see below items:
o [2.4 GHz]: Set the default Hotspot
frequency to 2.4 GHz
o [5 GHz]: Set the default Hotspot
frequency to 5 GHz
6.5 Identification Settings
6.5.1 RoomID
o Navigate to the [Identification Settings]
[RoomID] menu
o This is a (maximum) 5 digits number that
can be used to distinguish between
different floors/rooms/setups when using
CMND
Intention is to fill in the room number in
this field
6.5.2 Premises Name
o Navigate to the [Identification Settings]
[Premises Name] menu
o You will see below items:
o [Force Customer Name]: Change to
[On] to define your custom name, if
[Off] then the name will be retrieved
from the weather service using the
Geonames ID
o [Custom Name]: Define the custom
name for the premises
Note: The Premises Name can be seen
in the default dashboard