Cleaning
Clean the appliance after every use.
Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.
1 Push the on/off slide downwards to switch off the appliance.
2 Remove the 3mm trimming comb or 0.5mm skin protector if it is
still attached.
3 Use the cleaning brush supplied to clean the 3mm trimming comb or
0.5mm skin protector.
4 Use the cleaning brush supplied to clean the inside of the
trimming head.
5 Rinse the 3mm trimming comb and the 0.5mm skin protector under
the tap.
6 Rinse the inside of the trimming head under the tap.
7 Carefully shake of excess water and let dry.
ENGLISH8
To Next Page
Loading...
