EasyManua.ls Logo

Philips BG2024 - Electromagnetic fields (EMF); Charging the Appliance

Philips BG2024
204 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-
Do not use the supply unit in or near wall
sockets that contain or have contained an
electric air freshener to prevent irreparable
damage to the supply unit.
Electromagnetic fields (EMF)
-
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
General
-
This appliance is waterproof. It is suitable for use in the bath or shower
and for cleaning under the tap. For safety reasons, the appliance can
therefore only be used without cord.
-
The appliance is suitable for mains voltages ranging from 100 to 240
volts.
-
The supply unit transforms 100-240 volts to a safe low voltage of less
than 24 volts.
-
Maximum noise level: Lc = 75 dB(A).
Charging
Charging takes 1 hour (BG2038/BG2036) or 8 hours
(BG2028/BG2026/BG2025/BG2024) depending on the model. When the
appliance is fully charged, it has an operating time of up to 50 minutes.
When the battery status indicator flashes red, the battery is running low
(approx. 10 minutes of operating time left) and you need to recharge the
appliance.
1 Insert the small plug into the charging stand.
2 Put the appliance in the charging stand.
8
English

Other manuals for Philips BG2024

Related product manuals