Need help?Do you have a question about the Philips CD 824 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Transport | CDM-4/19 |
| Frequency Response | 20 Hz - 20 kHz |
| Power Consumption | 15 W |
| Dynamic Range | 96 dB |
| Channels | 2 (Stereo) |
| Digital-to-Analog Converter | TDA1541A |
| DAC | Philips TDA1541A |
| Output | Line output, Digital output |
| Channel Separation | 100 dB |
| Line Output | 2.0 V RMS |
| Digital Output | Coaxial |
| Dimensions | 420 mm |
| Output Voltage | 2.0 V RMS |
Setting the correct mains voltage and fuse for the player.
Details on connecting the player to other audio equipment.
Explains the functions of all front panel buttons and the player's display.
How to select tracks, start playback, pause, and use playback modes.
Details on programming tracks, FTS memory, and storing settings.
How to start, stop, resume playback, and select tracks.
How to search for passages, pause, and repeat tracks or the entire CD.
How to start playback from a specific track or repeat a defined passage (A-B).
Covers ADD-IN, TAKE-OUT, and SCAN programming methods.
How to check, play, erase programmes, and erase individual tracks.
How to compile and store up to two favourite track programmes.
To Next Page
