Philips CD 931 - Programming Functions; Storing and Playing Programmes; Favourite Track Selections (FTS)

English
<§D PROGRAMMING
FAVOURITE TRACK SELECTIONS
STORING A PROGRAMME (PROGRAMME and 1-0)
You can store 30 tracks from each CD in any required
sequence in a programme.
• In STOP mode, press PRG(program) to open the memory.
- PROGRAM lights up and PROGRAM starts flashing.
• Key in the required numbers; every number you key in will
be directly included in the programme.
- Each time you key in (= store) a track number, the number of
tracks and the playing time of your programme will be
shown under TRACK and TOTAL TIME.
- The track number indicator always shows which numbers
have been stored.
• Press PRG(program), STOP/CP or PLAY/REPLAY to quit the
PROGRAM mode.
FULL lights up if you exceed the maximum of 30 tracks.
A programme can also be stored in the player's permanent
(FTS) memory. Your favourite track selection of a given CD
can then be called up and played whenever you wish. The
selection will remain stored in the FTS memory even if you
play the entire CD or compile a different programme from it
The number of CDs which can be stored in the FTS memory
depends on the number of tracks in each programme.
NOTE!
The FTS button must always be used together with other
buttons L After pressing FTS, the message FTS PROGRAM-
F‘L A Y “ SHUFFLE - CANCEL appears on the display twice
Press the next button within the time this message is
displayed otherwise the player will go back to the STOP
mode.
CHECKING THE PROGRAMME (REVIEW)
• Press REVIEW prior to, during or after programmed play.
- REVIEW lights up.
- All the numbers appear in the programmed sequence under
TRACK.
- Under TRACK TIME you will see the playing time of each
track.
NO FROGRRM lights up if no track numbers have yet been
stored.
With REVIEW you can proceed more rapidly to the next block
of information.
PLAYING THE PROGRAMME (PLAY/REPLAY)
• Press PLAY/REPLAY.
- Playback starts with the first number of the programme.
All keys (except EDIT, PRG(program), CLR(clear), PRESETS and
FTS) can be used during programmed play.
Search for a particular passage is only possible within the track
being played.
STORING A FAVOURITE SELECTION (FTS and PROGRAM)
• Press FTS.
- FTS starts flashing.
- FTS PROGRAM - PLRY - SHUFFLE - CRNCEL appears on
the display twice.
• Press PRG(program) to open the memory.
• Compile your programme as described in the
'PROGRAMMING' section.
• Press PRG(program) again.
- FTS lights up, with next to it the ranking number of this
programme.
- The selection is now stored in the FTS memory under this
number.
NOTE!
- If a selection of a particular CD has already been stored,
then it is automatically erased and the new selection is
stored under the old ranking number.
- If NO SPACE appears, then the FTS memory is full you
must erase one or more old FTS programmes to make
room to store the new programme.
ERASING A PROGRAMME (STOP/CP or OPEN/CLOSE)
• Press STOP/CP twice or, if the CD has already stopped, just
once; you can also press OPEN/CLOSE straight away.
- The programme has now been erased.
ERASING A TRACK FROM THE PROGRAMME (CLEAR)
• Press REVIEW before or after programmed play (STOP
mode).
- REVIEW lights up.
- All the numbers appear in the programmed sequence under
TRACK.
• Press CLR(clear) as soon as the number you wish to erase
appears.
- The number disappears from the number indicator; it has
now been erased.
- The display shows the remaining programme time for a few
seconds.
FTS PROGRAMMED PLAY (FTS and PLAY/REPLAY)
• Press FTS.
- FTS starts flashing.
- FTb FRUbRRM “ PLA Y ~ SHUFFLE - CANCEL appears on
the display twice.
• Press PLAY/REPLAY.
- The chosen selection will now be played.
• Press STOP/CP twice if you wish to revert to normal play.
If NO FTS FROGRRM appears, no favourite selection has
been stored.
All keys (except EDIT, PRG(program), CLR(clear), PRESETS and
FTS) can be used while a favourite selection is being played.
Search for a passage is only possible in the track which is
being played.
8