Philips CDR 785 - EXTERNAL RECORDING; Analog vs. Digital Recording Comparison; External Recording Modes; Automatic Track Increment Function

Whenmakingrecordingsfromanexternalsource,we
recommendtodoanalogrecordingonlyifdigitalrecordingis
notpossible,Digitalrecordingwillusuallyresultinbetter
soundquality,
%rexternalrecordingyoucanchoosefollowingrecording
modes:
- AUXCD- to makeanautomaticrecordingof an external
sourcesimplyby startingthe source,
- AUXTRACK-to makean automaticrecordingof a single
trackfroman externalsourcesimplyby startingthe source,
- AUXMANUAL- to start a manualrecordingfroman
externalsource,
- AUXMIX MIC- to starta mixedrecordingof microphone
andexternalsourceinput,
- MIC ONLY-manualstart of microphonerecording,
Inrecordingmodetrackswil! beincrementedautomatically
suchthat thetrack numbersare positionedonthe same
positionasthe original,
• Pressasoften asnecessaryTRACKINCREMENTon the
remotecontrolduringstopwhen CDRis selectedto switch
theautomatictrack incrementfunctionon.
-t. RUTO TR Of',_is displayedandthefunctionis
switchedon.Trackincrementsare nowautomatically
detectedfromdigital sourcematerial.Inanalogsource
materiala silenceof 2.7secondsor moreis detectedas
a trackincrement.
• Pressasoften asnecessaryTRACKINCREMENTon the
remotecontrolduringstopwhen CDRis selectedto switch
theautomatictrack incrementfunctionoff.
-_ F_UTOT_7OFF is displayedandthe functionis
switchedoff. Tracknumberscan nowbeincremented
manuallyby pressingTRACKINCREMENTonthe remote
controlduringrecording.Theminimumtracklengthis 4
seconds.
Notes:
- Tracknumberscannotbechangedafter recording,
- Theautomatictrackincrementonly workswith consumer
sourceswith a digital outputsignalaccordingto the IEC
958(consumerpart) audiostandard.DAT,DVDandDCCdo
not deriverthissignal.
27