Philips CSP530 - Page 8

6
EN
Note
• Match the “left”, “right”, “+” and “-” terminals correctly. Revised polarity may degrade sound
quality.
• Two 4-ohm speakers, wired in stereo, present a 8 ohm load to each channel of the
amplier.Mosttwochannelampliersworkwellinthisconguration.However,iftwo
4-ohmspeakers,wiredinparalleltoabridgedtwo-channelamplier,presenta2-ohm
monoloadtotheamplier.Most2-channelampliersdonotsupport2-ohmmono
operation!Amplierdamagemayresult!
8 Mount on the speaker as shown below.
9 Press and insert the edges of the grille net.
Tip
• The speaker grille can be mounted without the grille net, if you like.