Need help?Do you have a question about the Philips CUCINA HR7745 and is the answer not in the manual?
General| Power | 700 W |
|---|---|
| Speed settings | 2 |
| Blade material | Stainless steel |
| Accessories | Mill |
| Material | Plastic |
Appliance cuts off power supply due to overheating. Follow steps to reset.
Ensures appliance only switches on when parts are correctly assembled and locked.
Instructions for cleaning the Click & Go system. Clean immediately after use.
Ensure the blade is placed in the bowl before adding ingredients for safe operation.
Steps to take if food adheres to the blade or bowl wall.
Avoid excessive force on the pusher to prevent damage during ingredient processing.
Cut large ingredients into smaller pieces to ensure they fit the feed tube.
Ensure even filling of the feed tube for optimal processing results.
Use low speed for soft ingredients to avoid puree formation during shredding.
Process large quantities in small batches, emptying the bowl between each.
Balloon beater is suitable for whipping cream, eggs, pudding, mayonnaise, and cake mixtures.
Avoid using balloon beater for butter/margarine mixtures or kneading dough.
Ensure bowl and balloon beater are dry and grease-free for whisking egg whites.
Clean the balloon beater immediately after use following cleaning instructions.
Citrus press operates only when blender cap and cone are correctly assembled onto motor unit.
Set control knob to low speed, then press fruit onto the cone for juicing.
Periodically stop pressing to remove pulp from the sieve for efficient operation.
Turn off appliance and remove bowl with sieve/cone to finish pressing or remove pulp.
Avoid running the appliance more than twice consecutively; allow cool down time.
Allow the appliance to cool down to room temperature before continuing processing.
Avoid applying excessive pressure on the blender jar handle during assembly/disassembly.
Safety warning: Never open the lid while the appliance is in operation.
Safety lock ensures blender operates only when jar rib aligns with motor unit markings.
Add liquid ingredients through the lid opening while the blender is running.
Cut solid ingredients into smaller pieces before processing for efficient blending.
Process large quantities in small batches, emptying the bowl between each.
Soak hard ingredients like soy beans in water before processing to soften them.
Ensure ingredients are cooked when blending soup for optimal results.
Limit hot/foaming liquids to 1 litre in blender jar to prevent spillage.
Troubleshooting: If results are poor, switch off, stir with spatula, reduce quantity, or add liquid.
Instructions for removing ingredients stuck to the blender jar wall.
Insert the kneading accessory into the bowl before adding ingredients.
Standard kneading time ranges from 30 to 180 seconds for all jobs.
Safety: Never insert hands or objects into the feed tube; use only the supplied pusher.
Wait for the sieve to stop rotating completely before removing the lid.
Turn on the appliance before inserting fruit into the juicer for proper operation.
Safety: Do not use the juicer if the sieve is damaged.
Juicer operates only when all parts are correctly assembled, ensuring safety.
Preparation steps before using the juicer: cut, peel, and destone fruits.
Instructions for storing the appliance and its accessories.
Always disconnect power before removing accessories or cleaning the motor unit.
Clean Click & Go button by unscrewing counter-clockwise. Clean lid in dishwasher or soak.
Disassemble balloon beater by removing from gear housing, taking out gearwheels.
Gearwheels and balloon beater are dishwasher-safe.
Contact Philips Customer Care Centre or visit website for information, problems, or service.
Check lid locking and blender cap assembly. Ensure correct part installation for functions.
If only blender works with both parts attached, remove blender jar and attach blender cap.
Appliance stopped due to overheating. Unplug, cool for 60 mins, then restart.
Check blender cap assembly. Citrus press requires correct cap installation to function.
Check lid locking and blender cap assembly. Ensure correct part installation for functions.
Remove lid, unscrew Click & Go button, clean lid and button. Dishwasher or soak method.
Recipe for soy milk using the filter. Do not process more than one batch at a time.
Recipe for fresh fruit milkshake. Process one batch at a time and let cool.
Recipe for chocolate cake, including dough, filling, and icing instructions.
To Next Page
