Philips D2701B/25 - Page 33

33EN
15 Telephone
answering
machine
Note
• Available only for D275.
Your phone includes a telephone answering
machine that records unanswered calls when
it is on. You can access the answering
machine remotely and change the settings
through the answering machine menu on the
handset. The button on the base station
lights up when the answering machine is on.
Turn the answering machine
on or o
You can turn the answering machine on or
o through the base station or the handset.
Through the handset
1
Press .
2
Select [ANS.MACHINE] > [TAM ON/OFF],
then press to conrm each selection.
3
Select [ON] or [OFF], then press to
conrm.
»
The setting is saved.
Through the base
Press to turn the answering machine on or
o in standby mode.
Note
• When the answering machine is
switched on, it answers incoming calls
after a certain number of rings based on
the ring delay setting.
Set the answer mode
1
Press .
2
Select [ANS.MACHINE] > [TAM
SETTINGS] > [ANSWER MODE], then
press to conrm each selection.
3
Select [ANS & REC] or [ANSWER ONLY],
then press to conrm.
»
The setting is saved.
Note
• [ANS & REC] means calls are answered
and messages are recorded. [ANSWER
ONLY] means calls are only answered,
messages are not recorded.
Set the answering machine
language
The answering machine language is the
language for the outgoing message (OGM).
1
Press .
2
Select [ANS.MACHINE] > [TAM
SETTINGS] > [TAM LANGUAGE], then
press to conrm each selection.
3
Select a language, then press to
conrm.
»
The language setting is saved.