Philips DreamStation 2 - Page 3

• Peelthepre-paidlabelfromitsbackingandattachittotheshippingboxmakingsureyou  
  completelycovertheoriginalshippinglabel.Usetheabovediagram(right)asreference.
• Ensuretheshippingboxissecurelytapedandsealedtopreventit
  frombreakingopenduringshipment.
!
Do not return: SD card, tubing, or mask
Contact FedEx toll-free at (800) 463-3339 or go to FedEx.com.
 •Findtheclosestdropolocationorscheduleapickup.
 •YoumayalsogivethepackagetoanyFedExdrivermakingregularpickupsordeliveries.
 •Alternatively,youcantakethepackagetoanauthorizedFedExshippingoutlet.
 •Thisreturnshipmentispre-paid,sothereisnochargetoyou.
DreamStation 2
Thank you for your cooperation in this eort.
Pleasecontactusat833-262-1871orwww.philips.com/SRC-updateifyouhaveanyquestions.
Thank you for your cooperation and assistance in connection with Philips’ eorts to remediate the recalled Respironics Sleep and Respiratory Care
devices (each, an “Aected Device”). To expedite these eorts, Philips in many cases is (or will be) providing a replacement device (an “Advanced
Exchange”) in advance of the return of an Aected Device. By accepting the Advanced Exchange, you are agreeing to return your Aected Device
to Philips so that, in many cases, Philips can expeditiously refurbish the returned Aected Device to help ensure another user receives a replacement
device sooner. This is consistent with the FDA’s direction for a prompt remediation.
Upon receipt of Advanced Exchange, please follow the instructions that you receive regarding the return of your Aected Device to Philips.
Specically, it is important that you promptly return your Aected Device. Your returned Aected Device will either be repaired to replace
the foam insulation with an approved insulation, or will be destroyed.
Please note that to eectuate the Recall consistent with FDA laws and regulations, it is necessary that you return your Aected Device promptly.
By participating in the Advanced Exchange or receiving a remediated device, you acknowledge and agree that the foam insulation will be removed
and may be discarded, and that your Aected Device may be destroyed or refurbished.
Thank you again for your assistance in this matter.
Basic Setup & Return Instructions
1
2
Package your old machine for return shipment.
• Using the packaging material that came with your replacement device,
  placeyouraecteddeviceintheshippingboxprovided.
• Tapetheboxafterpackagingiscomplete.Thetapeshouldbecenteredsoequalamounts
  oftapeextenddownthesidesoftheshippingboxasshownbelow(left).
Instructions: Return Instructions for aected device
3