Philips DVD707 - Page 4

4
5. Dismantling instructions and exploded view
DISMANTLING INSTRUCTIONS DVD707/751/781/782
See exploded view for item numbers
Cover 232
Remove 7 screws 233
Lift cover at rearside to remove
Front assy 200
Remove 2 screws 212
(front to frame)
Unlock front from frame by
releasing successively snaps
Place front assy in front of
the set (service position)
Display board 1004
Remove 7 screws 211
(board to front), pay attention
to the earth spring 252
Demount board
Switch assy 8008
Remove 2 screws 211
Demount switch assy
Loader module 1005
Remove 4 screws 217
(loader to frame)
Demount loader module
Remove connections to
MPEG and PSU board
Remove the screw 255
(MPEG board to frame)
Remove 5 screws 227
(MPEG board to back plate)
Release the snap of spacer
254 (board to frame)
Demount board
Remove flex connections to
MPEG board
Remove 3 screws 222
(PSU board to frame)
Remove 1 screws 228
(PSU board to back plate)
Release the snap of spacer
226 (board to frame)
Demount board
Remove flex connections to
PSU board
MPEG board 1002
PSU board 1001
Mounting
Demounting
1001 Power board
1002 MPEG board
1004 Front board
PCB LOCATION DVD707/751/781/782
1005 Loader module
5. Dismantling instructions and exploded view
PARTS 12NC LIST
DVD707/751 DVD707/781 DVD707/782
1001 PSU board 3141 018 02490 3141 018 02490 3141 018 02490 1002 MPEG board 3141 018 02540 3141 018 02480 3141 018 02480 1005 Loader module 3141 018 02190 3141 018 02190 3141 018 02190 1004 Front board 3141 018 02510 3141 018 02510 3141 018 02510