2a Connect existing antenna cable/satellite signal (or from
the Cable/ Satellite Box [RF OUT or TO TV] ) to the
ANTENNA input jack at the back of the DVD
recorder.
2b Use the supplied RF coaxial cable to connect the DVD
recorder’s TV output jack to your TV’s antenna
input jack.
2c Use the supplied AV cables (yellow/red/white ends) to
connect the DVD recorder’s VIDEO (CVBS) and
AUDIO L/R OUT2 jacks to the matching Video/Audio
input jacks at the back of your TV.
2d Connect the power cable from the DVD recorder’s
~ MAINS to the AC power outlet.
Helpful Hint:
For additional connection diagrams,
see User Manual, pages 10 ~ 17.
3 start initial setup
USB
System Menu - Channel Setup
Modify Channel Information
Search
Edit
System Menu - Language
Default Disc Menu Language
Default Subtitle Language
On Screen Display Language
English
Default Audio Language
English
English
English
System Menu - Clock
Time (hh:mm:ss}
Show DivX® Registration Code
Date (dd/mm/yy)
31/01/05
10 : 33 : 57
OK
Sort Channel
Sort
Channel Search
3a Press STANDBY-ON 2 on
the DVD recorder to turn it
on.
Note: For successful installation,
your cable/satellite box must be
turned on.
3b Turn on the TV and select the
correct video in channel.
The blue PHILIPS DVD
background screen will appear on
the TV.
3c Press SYSTEM MENU on
the remote control.
Use keys to go through
the menu. Select an item by
pressing
, and confirm a setting
by pressing OK.
3d Highlight and press .
Setup and install TV channels.
Select { Channel Search }
and press OK on the remote
control to start automatic TV
channel search.
3e Highlight and press .
Select the language.
– select TV On-Screen Display
language.
– select default Disc Menu
language.
– select default subtitle language.
– select default audio language.
3f Highlight and press .
Set the Date and Time.
Use the numeric keypad 0-9
to input the date/time, then
press
OK to confirm.
3g Press SYSTEM MENU to
exit.
2a
2b
2c
2d
To Next Page
Need help?
Picture / Display
Power
Weight and Dimensions
